|CroninProjects.org/ Gackstatter/ photos/|
We received five putty samples from Aaron Muderick, which he labeled as follows: CB, HSB, Liquid Glass, LSB, and WB. The samples were rolled into cylinders 3.5 cm high with diameters that varied according to the volume provided. All samples were set on a flat end (like a soda can standing upright) and left to flow. The photos that are accessible through the tables below show the putties at the beginning of the experiment, at ~5 hours, and at ~22 hours.
|Putty ID||Volume||Start Image||5 hr image||22 hr image||Shape after 22 hr|
|CB||~35.6 cm3||Show||Show||Show||slightly tacky, top was approximately flat|
|HSB||~43.3 cm3||Show||Show||Show||slightly tacky, top was approximately flat|
|Liquid Glass||~29.8 cm3||Show||Show||Show||very tacky, top was approximately flat|
|LSB||~33.7 cm3||Show||Show||Show||slightly tacky, top was approximately flat|
|WB||~38.5 cm3||Show||Show||Show||not tacky, top was domed|
If you have any questions or comments about this site or its contents, drop an email to the humble webmaster.
All of the original content of this website is © 2017 by Vincent S. Cronin